...
There are multiple versions of this error. Please see the dropdowns below for information.
Note |
---|
More error messages and solutions are being added |
Expand | ||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||||||||||||||||||||
CauseINtime has a problem that prevents the INtime node from starting. Most commonly this can be attributed to some INtime specific settings or PC incompatibilities with INtime's RTOS (Real-Time Operating System). Examples include camera or imaging software that utilize some type of imaging/capture card installed on the computer. Solution1) If you installed the A3200 and you did not restart your PC, restart your PC before you use the A3200. 2) Pass the FireWire/HyperWire card back to Windows control. Then restart the PC and re-pass the FireWire/HyperWire card to INtime.
3) Uninstall both A3200 and INtime (INtime is installed as a separate program). Reinstall A3200, therefore reinstalling INtime. 4) Optimize the PC. This can be done by following the User Guide For Optimizing Performance found on our website. This includes a wide range of Windows and BIOS settings.
5) Review the User Guide for Windows 10 Updates found on the Aerotech website.
6) Upgrade the A3200 software to the newest version or upgrade to at least v6.03.003 for newer PC models.
7) Change INtime Node settings. Open the INtime Configuration program. Go to the Node Management icon and make the following changes. Then save and restart the PC. Select AerotechNode0 at left, and go to the Kernel tab. Set "Start automatically" to Yes
Go to the System tab. Set "Boot Mode" to Dedicated
8) Open A3200 Configuration Manager. Co to Controller > Connection Settings (toolbar dropdown). In the Advanced tab, set the "Start A3200" option to Automatically. Click Apply and OK. Restart the PC.
9) If none of these solutions helps resolve or narrow down the problem please contact our Global Technical Support team.
|
...