Problem

You are seeing the following error.

"An error occurred while processing a calibration file: <Location Code/Message>"

Solution

This is not an exhaustive list of causes, but some common or reoccurring sources of these particular errors.

Ensure that the argument given to POSUNIT in the calibration file is one of the following:

  • PRIMARY
  • SECONDARY
  • COUNTS


The optional SERIALNUMBER keyword was added to the calibration file format in A3200 version 5.02. If the calibration file was generated in or above 5.02, the SERIALNUMBER keyword must be removed in order to use the cal file with an older version of A3200.


  • Ensure that you are attempting to load the correct calibration file. The file should have the *.cal extension.
  • Ensure that the calibration file loaded in A3200 Configuration Manager exists at the file directory specified in A3200 and that A3200 has permissions in Windows to access that directory.


You specified an invalid argument after :START, :START2D, :GALVOPOWER2D, or :GALVO2D in an axis calibration file.

  • Make sure that all of the arguments in the axis calibration file are spelled correctly.
  • Make sure that all of the arguments in the axis calibration file are valid for the type of calibration that you are using.

Related articles

Related articles appear here based on the labels you select. Click to edit the macro and add or change labels.



Related issues