This guide is intended for analog/sine encoder stages that are experiencing a Position Feedback Fault, Velocity Feedback Fault, for maintenance and upkeep purposes, or as recommended by an Aerotech representative. This process can be completed in about 5 minutes on most stages.
Expand | |||||
---|---|---|---|---|---|
| |||||
Follow these instructions if your stage can be Enabled without getting faults and can move short distances normally.
|
Expand | |||||
---|---|---|---|---|---|
| |||||
Follow these instructions if your stage can be Enabled without getting faults and can move short distances normally.
|
Expand | |||||
---|---|---|---|---|---|
| |||||
Follow these instructions if your stage receives any faults when Enabled, or if the axis is unstable. This process will require two people: one to operate the software, and one to move the stage manually/by hand (called the stage operator below).
|
Expand | |||||
---|---|---|---|---|---|
| |||||
Follow these instructions if your stage receives any faults when Enabled, or if the axis is unstable. This process will require two people: one to operate the software, and one to move the stage manually/by hand (called the stage operator below).
|
Related articles
Content by Label | ||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Page properties | ||
---|---|---|
| ||
|