How to control a PRO stage via MODBUS TCP.

Step-by-step guide

Same Step-by-step guide for Ensemble controller:

  1. First Configure the Modules of WAGO and Soloist with all necessary IP addresses and the WagoIO with BootP or Wago Ethernet settings. This is one of the difficult parts because not every time is every IP address really the configured IP address. 
  2. Check the IP address with a ping via cmd console in Windows. 
  3. Setup the parameter file for Modbus (Master) on the Soloist controller
  4. Write a program to control the PLC module from the Soloist Master
  5. Make the first test: connect the Ethernet port from the PLC to the Ethernet port of the Soloist controller.

A detailed description is in the file.